Datasheet

15NetShelter VL Enclosure—Unpacking, Installation, and Customization
3. Remove the screw, latch, and washer from the back of the door handle assembly using the Torx
T30/#2 Phillips wrench (provided). Rotate the latch 180 degrees and reattach the latch.
4. Remove the door. See “Removing the doors” on page 13.
5. Remove the hinges from the frame using the Torx T30 /#2 Phillips wrench (provided). Rotate the
hinges 180 degrees, and reinstall them on the other side of the frame of the enclosure.
ns1 408 a
180°
ns0974a
180°