Datasheet

4 NetShelter VS Enclosure

Before Installation

Location of keys and mounting hardware

The keys are packed inside the enclosure, fastened at the top of one of the mounting rails. The bag

containing the mounting hardware is fastened to the floor of the enclosure.

Tools required

The following tools (not included) will be necessary to unpack and adjust the enclosure:

• Phillips screwdriver

• Shears/utility knife

•Level

Warn

Before you begin to unpack the enclosure, read and follow these warnings to prevent

injury and damage:

• Use at least two people to unpack the enclosure.

• Stabilize the enclosure before installing the components—failure to do so may

cause the enclosure to tip over.

• Do not extend more than one component from the enclosure at one time to prevent

the enclosure from becoming dangerously unstable.

• Load the heaviest components first and place them toward the bottom of the

enclosure to prevent the enclosure from becoming top-heavy.