Datasheet

Joining Enclosures: How to move Baying Hardware

NetShelter VX Enclosure: Unpacking, Installation, Customization 33

When the enclosure with sides is on the right

1. Carefully slide the enclosures apart.

2. Remove the left side panel of the enclosure with sides.

3. Remove the pan-head screw and nut

securing each of the baying brackets

from the front left vertical frame of

the enclosure on the left without

sides. Save the pan-head screws, nuts,

and baying brackets for use in the

next step.

4. Using the pan-head screws and

nuts, secure the baying brackets to

the front left vertical frame of the

enclosure on the right.

5. Install the side panel removed in step 2 on the left side of the enclosure without sides (optional).

See “How to Remove and Install the Side Panels” on page 10.