Datasheet

Joining Enclosures: How to move Baying Hardware
32 NetShelter VX Enclosure: Unpacking, Installation, Customization
4. Using the two pan-head
socket screws and nuts, fasten
the baying brackets with
baying trim attached that you
removed in step 3 to the front
right vertical frame of the
enclosure on the left.
5. Remove the low-profile
socket screw from the baying
plate on the right rear side of
the enclosure without sides.
Save the screw and baying
plate for use in the next step.
6. Using the low-profile socket
screw, secure the baying plate
removed in step 5 to the right
rear side of the enclosure with
sides.