Datasheet

Product Description and Inventory: How to Reverse the Front Door
18 NetShelter VX Enclosure: Unpacking, Installation, Customization
Reinstall the door assembly:
8. Loosely tighten the hinge pin brackets.
9. Reinstall the door assembly.
a. Align the lower door hinge pin with the hole in the bottom of the hinge pin bracket and slide
the hinge pin into the hole.
b. Pull down the upper hinge pin.
c. Align the upper hinge pin with hole in the upper hinge pin bracket and release the hinge pin
into the hole.
d. Make sure that the door opens and closes properly.
10. Firmly tighten the countersunk screws to secure the hinge pin brackets to the enclosure frame.
11. If using the enclosure without sides, reinstall the side panels.
Warning
To avoid personal injury or damage to the enclosure, one person should
support the door while another removes the door from its frame.
See “How to Remove and Install the Side Panels” on page 10.