Datasheet

18 NetShelter VX 25U Enclosure
How to Install Equipment
This section provides general information on installing rack-mountable equipment in the enclosure.
Read the instructions provided with the equipment you are installing for more specific instructions.
How to identify one U-space on the mounting rail
When installing equipment, locate the top and bottom of a
U-space on the mounting rails. The number at every third hole
on the mounting rails of a NetShelter enclosure indicates the
middle of a U-space.
How to install and remove caged nuts
To install a caged nut:
1. Insert the caged nut into the square hole by hooking one
side of the caged nut assembly through the far side of the
hole.
2. Place the caged nut tool (provided) on the other side of the
caged nut and pull to snap it into position.
To remove a caged nut:
1. Remove any attached screw.
2. Grasp the caged nut and squeeze the sides to release it from the square hole.
19
1 U
20
21
Warn
i
ng
Install the caged nut horizontally. Do not install the caged nut
vertically with the sides of the caged nut engaging the top and
bottom of the square hole.