Datasheet

NetShelter VX 25U Enclosure 17
Horizontal Braces
Each side of the enclosure has two adjustable horizontal braces between the vertical frame posts to
support the vertical mounting rails and to manage cables.
How to move a brace
1. Use the 5-mm hex wrench (provided) to remove the four hex-head screws that hold the brace to
the frame posts.
2. Remove the caged nuts from the frame post.
3. At the new position for the brace, secure the brace to the frame posts:
a. Insert a caged nut into each appropriate hole at the new position on the frame posts.
b. Insert a hex-head screw through the brace and frame post at each caged nut. Tighten the
screws.
See “How to install and remove caged nuts” on page 18.