Datasheet

Installation: How to Reverse the Front Door
14 NetShelter VX 25U Enclosure
Reinstall the door assembly:
1. Reinstall the door assembly.
a. Align the lower door hinge pin with the hole in the bottom of the hinge-pin bracket, and slide
the hinge pin into the hole.
b. Pull down the upper hinge pin.
c. Align the upper hinge pin with the hole in the upper hinge-pin bracket, and release the hinge
pin into the hole.
d. Make sure that the door opens and closes properly.
2. Firmly tighten the countersunk screws to secure the hinge-pin brackets to the enclosure frame.
3. Reinstall the side panels.
Warn
i
ng
To avoid personal injury or damage to the enclosure, one person should
support the door while another removes the door from its frame.
See “How to Remove and Install the Side Panels” on page 9.