Datasheet

NetShelter VX 25U Enclosure 11
How to Reverse the Front Door
Remove the side panels:
Reverse the door handle:
1. Remove the two Phillips-head screws from
the rear of the door handle assembly, and
remove the handle assembly from the door.
2. Rotate the door handle assembly 180° and
reinstall it, using the hardware removed in
step 1.
Remove the door:
Open the door and pull down on the spring-
loaded hinge pin attached to the top of the
door. Lift the door from its frame and set it
aside.
See “How to Remove and Install the Side Panels” on page 9.
Warn
i
ng
To avoid personal injury or damage to the enclosure, one person should support the door
while another removes the door from its frame.