Specifications

8
For more information, visit APC’s Web site at www.apcc.com or call your local APC office
APC’s slimline rack-mount Smart-UPS
delivers premium uninterruptible power
and the most advanced performance
features available.
Offered in a broad range of VA ratings, designed to
address a variety of network equipment configura-
tions, Smart-UPS RMs are easy to install and are
compatible with all popular rack systems, including
the Compaq server rack.
With an advanced line-interactive design, PowerChute
plus power management support for major network
OSs, (including Windows NT and Novell Netware), and
PowerNet SNMP support for Novell NMS, Compaq’s
Insight Manager, and other SNMP based NMSs, it’s
not surprising that APC UPSs protect more networks
than all other UPS brands combined.
Smart-UPS RMs are equipped with a SmartSlot
internal accessory slot to provide Web/SNMP
management, control via modem or multi-OS
shutdown with the addition of the appropriate card.
APC Smart-UPS Rack-
mount 700, 1000, and
1400 are for protection of
servers, internetworking
equipment, and PBX
telecom systems. These
Smart-UPS rack-mount units are only 2U (89mm) in
height allowing more room to rack-mount other
critical equipment. With longer runtime on battery, a
faster and easier replacement battery chassis tray,
improved voltage regulation, enhanced intelligent
battery management, and a competitive price, the
Smart-UPS 2U Rack-mount will be an excellent
addition to your power protection solution.
For VA requirements between
250 and 450VA, the
PowerStack
™
family
(PS250/PS450) is ideally
suited to meet your growing
rack, stack or wall mounting
requirements. The PowerStack
was designed to protect unmanaged hubs, switch-
es, small routers, and small telephone key systems,
all of which are often housed in remote wiring clos-
ets. PowerStack is 1U high, comes with four power
outlets and has user replaceable, hot-swappable bat-
teries. (See www.apcc.com/products/smart-
ups_rm/index.cfm for more information and
technical specs on the PowerStack family.)
APC Smart-UPS RMs protect your data
Your data is protected because Smart-UPS RMs sup-
ply network-grade battery backup when power fails.
With PowerChute plus software or monitoring kits,
APC Smart-UPS RMs will safely save your data and
shut down your operating system before the battery
is fully discharged, whether you’re there or not.
APC Smart-UPS RMs protect your hardware
System life is extended through superior full-time
multi-stage surge suppression and noise filtering.
Novell approves this product for network protection,
without additional external conditioners.
APC Smart-UPS RMs increase your overall
system availability
SmartBoost
™
and SmartTrim
™
automatically correct
low voltage and high voltage conditions allowing you
to work through brownouts and overvoltages
without using battery power.
APC Smart-UPS RMs reduce your cost
Smart-UPS RMs reduce your cost by decreasing
downtime, and giving users increased control and
power management. Users can further reduce costs
with Smart-UPS RM user replaceable, hot-swappable
batteries. Within minutes, a user can swap out a fac-
tory supplied battery while the load is still up and run-
ning, eliminating unnecessary service costs and
downtime. (Typical battery life is three to six years.)
Smart-UPS
®
Rack-mount Series
NEW! Smart-UPS 5000 (SU5000I and SU5000RMI5U -
5kVA UPS)
The Smart-UPS 5000 is the first UPS offered with APC’s
Web/SNMP management card (AP9606) pre-installed. This
product allows you to easily monitor and control your
SU5000 over the World Wide Web or your network. In
addition, the SU5000RMI5U has the most compact form
factor of any 5 kVA rack-mount systems.
Smart-UPS 5000RMI5U
Ships with Web/SNMP Management Card
pre-installed through April 1, 2000
APC Web/SNMP Management Card
New!