Specifications

5
For more information, visit APC’s Web site at www.apcc.com or call your local APC office
Manageability
a
b
c
d
e
f
g
h
i
j
Load Display*- Shows the power being
drawn by the load and prevents you
from exceeding capacity.
SmartTrim LED*- LED lights when the
UPS is correcting a high utility volt-
age condition.
On-line LED- LED lights when the UPS
is supplying utility power to the
loads.
SmartBoost LED*- LED lights when the
UPS is correcting a low utility voltage
condition.
On/Test Button- Turns on the UPS and
activates the UPS self-test and utility
line voltage displays.
Off Button- Turns off the UPS and the
load. Specifically designed to prevent
accidental shutdowns.
Overload LED- LED lights and alarm
sounds when the load connected to
the UPS exceeds capacity.
On-Battery LED- LED lights and alarm
sounds when the UPS is supplying
battery power to the load.
Replace Battery LED- LED lights and
alarm sounds when the UPS battery
is nearly dead and must be
replaced (typically within 30 days
.)
Battery Charge/Line Voltage Display*-
Displays both present battery charge
as a percentage of battery capacity
and utility line voltage. Alarm sounds
upon low battery condition
.
a
b
c
d
e
f
g
h
i
j
PowerChute plus power management software included
Meets the demands of high performance networks and enhances the reliability and manageability
of network and web servers.
Browser Manageable
The Smart-UPS is easily manageable through standard browsers on local computers, networked
computers or remote systems. (Requires PowerChute Web Device Manager running on a Windows
NT/2000 web server on your network. See www.apcc.com for a free download.)
E-mail and Pager Alerts
APC Smart-UPS E-mails and/or pages you via PowerChute plus alerting you of power problems
and allowing you to respond in order to maximise uptime.
Integrates with Server and Enterprise Management
All Smart-UPS are shipped with support for Dell Network/Node Manager, Compaq Insight Manager
(Windows NT and Novell NetWare), HP TopTools and IBM NetFinity, and plug-ins for HP Openview, CA
Unicenter, and Tivoli Netview.
Built-in SmartSlot gives you the customisable performance you need
APC Smart-UPS are equipped with a built-in SmartSlot* allowing you to implement various UPS
Accessory cards to customise and enhance the management of your APC Smart-UPS. APC’s
series of UPS accessories plug directly into the back of your UPS. When an APC accessory is
installed in your UPS, it becomes an integral part of the unit, drawing power from the UPS even
when the UPS is in “sleep mode.” Optional accessories allow you to remotely reboot individual
devices, monitor ambient temperature and humidity and work with Emergency Power-Off (EPO)
systems. (Accessories detailed on page 13)
(*Option not available on SU420INET/SU620INET models)
Informative LED Display
provides status at a glance
Instantly assess the status of your power and
the APC Smart-UPS without even pushing a
button. Bar meters and status indicators are
simple to use and easy to understand. Visible
and audible alarms alert you to fault conditions.
Load, Power and Volt Meters keep you
in control
The Load Meter* prevents you from
exceeding UPS capacity. The Volt Meter*
reports utility line voltage and battery
capacity, allowing you to gauge how much
time you have before batteries are depleted.
An alarm sounds when batteries are low,
allowing you time to save data and shutdown
the system.
*These features are not available on the SU420
INET/620INET models.
Alarms
Audible alarms alert you to changes in
operating environment and battery
conditions. Some alarms are software config-
urable and most can also be suppressed or
delayed to eliminate nuisance alarms.
*These features are not available on
the SU420INET/620INET models.