Specifications

SmartBoost™ automatically corrects brownout conditions
Allows you to work through brownouts without unnecessary battery drain.
SmartBoost automatically steps up low voltage to safe output levels.
SmartTrim™ automatically corrects overvoltage conditions
Allows you to work through overvoltages without unnecessary battery drain.
SmartTrim automatically steps down high voltage to safe output levels.
CellGuard means longer battery life
Improved reliability results from a precision battery charging system,
and automatic true-load battery tests. Redundant overcharge protection
contributes to longer battery life. SmartBoost
™
and SmartTrim
™
regulate
under- and overvoltages without switching to battery.
Battery Replacement Warning prevents downtime
APC Smart-UPS automatically performs a
self-test every two weeks. This ensures
you will be alerted to degraded batteries
before they wear out. Through software, or
the push of a button, you may perform
self-tests anytime.
Faster Recharge Time
APC Smart-UPS battery changing system
is microprocessor controlled to precisely
charge batteries in less time than legacy
UPS systems. This makes your system
available more quickly for subsequent
power disturbances.
The 60 second, user friendly, hot-
swappable battery replacement system
Saves the time and expense of returning
the UPS to the factory for battery service,
and allows safe and easy replacement of
batteries while your system is up
and running.
Predict failures
By periodically conducting self-tests and other diagnostics, Smart-UPS can
warn you of failures before they happen. For example, Smart-UPS will
proactively notify you 6-8 weeks in advance of a battery replacement.
Deliver diagnostic data
Smart-UPS constantly monitors its health and delivers the results via
Web, SNMP, E-mail, or paging.
Built into Smart-UPS is the ability to take the necessary actions to
reboot “hung” devices, giving you availability when you need it most.
•Reboot hung servers and networking equipment remotely via modem
•Reboot hung servers via Web, SNMP, or Telnet
•Monitor temperature, humidity and rack security
By adding APC accessory cards into the built-in SmartSlot
™
, you can monitor
power conditions and take action. The addition of the accessory cards
increases overall system availability by proactively notifying you of conditions
that could affect uptime. (Accessories sold separately and detailed on p. 13.)
Redundant Switch continuously monitors two AC circuits and automat-
ically switches from the primary to the redundant power source,
increasing overall system availability. (See p. 14 for more information.)
ProtectNet increases the availability of your systems by protecting your
wiring and cabling from “back-door” surges and spikes, which cause
system downtime and equipment damage.(For more information, visit
www.apcc.com/products/protectnet)
Availability
4
For more information, visit APC’s Web site at www.apcc.com or call local APC office
Computer protected with APC Smart-UPS
Overvoltage
Normal AC Normal AC
Brownout
Incoming
Power
SmartBoost/SmartTrim
corrects incoming
power to normal AC
Runs indefinitely
without draining battery
SmartBoost/
SmartTrim
Accessories Increase Availability
Redundant Switch
ProtectNet
™
Automatic Voltage Regulation
Prevent Downtime
Intelligent Battery Management
APC Smart-UPS battery recharge time of 2-3 hours
APC Smart-UPS cut battery
recharge time by 75%
Typical UPS battery recharge time of 8-16 hours
Take Action
QuickSwap
™