Specifications

15
For more information, visit APC’s Web site at www.apcc.com or call your local APC office
In this application, a Redundant Switch is used with two identical Smart-UPS and PowerChute plus. In
networking environments where redundant drives, processors, and power supplies are commonplace, mirrored
power protection configuration should be a major consideration. Protection: Both Smart-UPS will provide
continuous EMI/RFI filtering and surge suppression. Battery backup is available in case of a primary or
redundant AC source failure. In case of a severe power event, the redundant Smart-UPS will continue to
support the load and also provide graceful shutdown to Windows NT, Novell and Solaris based operating
systems. Power monitoring and management is available with PowerChute plus software and APC
accessories. In this configuration, the Redundant Switch also has an Emergency Power Off (EPO) connector
which allows the Smart-UPS to be switched off by a remotely operated EPO control. Such a configuration is
common in computer rooms and laboratories where, for safety reasons, power to the loads may
need to be disconnected.
Redundant Switch Configuration Table for “Best” Application
Redundant Switch Model Voltage Rating Power Rating of Load Recommended Smart-UPS
◆
SU043 230V 1400VA (2) SU700, (2) SU1000, (2) SU1400
SU044-1 230V 3000VA (2) SU2200, (2) SU3000
◆
Note: Smart-UPS should be identical tower,
rack-mount, extended run or rack-mount
extended run models where applicable.
Redundant Switch for Smart-UPS
Specifications SU043 SU044-1
Acceptable input voltage 230 VAC: 0 - 325 VAC
Output voltage 230 VAC: 207 - 253 VAC
(by default when used with Smart-UPS)
Frequency limits (on-line operation) 50 or 60 Hz, ±5%
Transfer time 6ms, typical
Normal Sensitivity
Maximum load 1400 VA 6 A 3000 VA 13 A
Operating temperature 0 to +50 ºC (+32 to +122 ºF)
Storage temperature -15 to +50 ºC (+5 to +122 ºF)
Operating and storage relative humidity 0 to 95%, non-condensing
Operating elevation 0 to +3,000 m (0 to +10,000 ft)
Storage elevation 0 to +15,000 m (0 to +50,000 ft)
Electromagnetic immunity IEC 801-2, 801-3, 801-4
Audible noise in dBA @ 1 m <45
Size (H x W x D) 4.45 x 43.2 x 19 cm
Weight - net (shipping) 4.5 (6.8) kg
Safety approvals GS licensed by VDE to EN 50091 and 60950
EMC verification CISPR 22 Class A verified
Power Inlet 2 IEC320/C14 2 IEC320/C20
Power Outlet 2 IEC320/C13 1 IEC320/C19, 2 IEC320/C13
Redundant
= Communications
= Power
AC Source “A”
AC Source “B”
Best:
Server
Smart-UPS ‘B’
Smart-UPS ‘A’