Manualshelf

Installation Manual

ManualsBrandsAPC ManualsComputer Accessories & PeripheralsAPC APCRBC140 Battery Replacement for Smart-UPS Models SRT10KRMXLI, SRT10KRMXLT, SRT10KRMXLT-10KTF, SRT10KXLI, SRT6KRMXLT, SRT6KXLT, SRT8KXLT
123456
Customer support and warranty information are available on the
APC by Schneider Electric web site, www.apc.com.
© 2016 APC by Schneider Electric. APC, the APC logo, Smart-UPS and PowerChute are owned
by Schneider Electric Industries S.A.S. or their affiliated companies. All other trademarks are
property of their respective owners.
EN 990-5181A-002
5/2016
RBC Installation Date
After RBCs are installed, the LCD shows a message to confirm if the installed RBCs are new. Select the correct option.
• Option Yes: The UPS sets the current date as the install date of the new RBCs.
• Option No: There is no change in the RBC install date.
When the replacement battery cartridge (RBC), is charged to full capacity, perform a Self Test and a Runtime
Calibration Test.
Check/modify the RBC install date
Use the UP/DOWN arrow buttons to navigate to the Config Menu > Battery > Installation Date.
POWER ON/OFF button
Load icon
Disable/mute audible alarm icon
UPS status information
Operation mode icons
ESCAPE button
OK button
UP/DOWN arrow buttons
Controllable outlet group status
icons
Battery status icons
su0870a
Output
230.0
v
On-Line
12 3
LOAD