Manualshelf

User Manual

ManualsBrandsAPC ManualsPOWERNetwork Management Card with Temperature Sensor for SMT / SMX / SRT / SURT Series UPS
12345678910
UPS Network Management Card 3 User Guide1
Introduction
Product Description
Features
The AP9640 Network Management Card:
• Provides UPS control and self-test scheduling features.
• Provides data and event logs.
• Enables you to set up notifications through event logging, e-mail, Syslog and SNMP traps.
• Provides support for PowerChute
®
Network Shutdown.
• Supports using a Dynamic Host Configuration Protocol (DHCP) or BOOTstrap Protocol (BOOTP)
server to provide the network (TCP/IP) values of the NMC.
• Provides the ability to export a user configuration (.ini) file from a configured card to one or more
unconfigured cards without converting the file to a binary file.
• Provides a selection of security protocols for authentication and encryption.
• Communicates with StruxureWare Data Center Expert or StruxureWare Operations.
• Supports Modbus TCP/IP.
• Supports BACnet/IP.
The AP9641 Network Management Card includes all AP9640 Network Management Card features and the
following:
• Provides two USB ports, which support upgrading the UPS firmware from a USB flash drive.
• Supports two universal input/output ports, to which you can connect:
– Temperature (AP9335T) or temperature/humidity sensors (AP9335TH)
– Relay input/output connectors that support two input contacts and one output relay (using the
AP9810 Dry Contact I/O Accessory, which is an optional add-on)
• Supports Modbus RTU via Universal I/O port 2, in addition to Modbus TCP/IP. For information on how
to configure Modbus RTU refer to the Modbus Documentation Addendum.
The Schneider Electric UPS Network Management Cards (NMC) mentioned below are
Web-based, IPv6 Ready products. Devices with the NMC installed can be managed using
multiple open standards such as:
Hypertext Transfer Protocol (HTTP) Secure SHell (SSH)
Simple Network Management Protocol
versions 1, 2c and 3
Hypertext Transfer Protocol over Secure
Sockets Layer (HTTPS)
File Transfer Protocol (FTP) Secure Copy (SCP)
Telnet Syslog
RADIUS Modbus
Building Automation and Control Networks
Protocol (BACnet)
Extensible Authentication Protocol (EAP) over
LAN (EAPoL)