User Manual

50UPS Network Management Card 3 User Guide
User Class: The name of the application firmware module, see “File Transfers”.
TCP/IP settings for IPv6 screen
Path: Configuration > Network > TCP/IP > IPv6 Settings
This option displays any current IPv6 settings of the UPS Network Management Card 3 (NMC). Use the lower
part of the screen to configure those settings, including disabling IPv6.
You have a choice of using manual or automated IP addressing. It is possible to use them both concurrently.
For Manual, select the check box and then enter the System IP v6 address and the Default Gateway.
Select the Auto Configuration check box to enable the system to obtain addressing prefixes from the router
(if available). It will use those prefixes to automatically configure IPv6 addresses.
IPv6 Possible Formats Description
fe80:0000:0000:0000:0204:61ff:fe9d:f156 full form of IPv6
fe80:0:0:0:204:61ff:fe9d:f156 drop leading zeroes
fe80::204:61ff:fe9d:f156 collapse multiple zeroes to :: in the IPv6 address
fe80:0000:0000:0000:0204:61ff:254.157.241.86 IPv4 dotted quad at the end
fe80:0:0:0:0204:61ff:254.157.241.86 drop leading zeroes, IPv4 dotted quad at the end
fe80::204:61ff:254.157.241.86 dotted quad at the end, multiple zeroes collapsed
::1 localhost
fe80:: link-local prefix
2001:: global unicast prefix