User Manual

48UPS Network Management Card 3 User Guide
The Web UI offers the following options for EAPoL configuration:
Setting Description
EAPoL Access
Used to enable or disable 802.1X security access.
NOTE: 802.1X security access is disabled by default. You can only enable
access when valid certificates and a valid passphrase for the private key are
provided.
Supplicant
Identifier
Allows you to set your own supplicant identifier (up to 32 characters including
whitespace).
NOTE: By default, the supplicant identifier is set to “NMC-Supplicant-xx:
xx:xx:xx:xx:xx” where six octets of “xx” are the MAC ID of the NMC.
CA Certificate
Upload/replace or remove a CA root certificate. The supported file formats are
PEM (Privacy Enhanced Mail) or the DER (Distinguished Encoding Rules)
format with permitted file extension .pem, .PEM, .der, or .DER.
Private Key
Certificate
Upload/replace or remove an encrypted private key. The supported file formats
are PEM (Privacy Enhanced Mail) or the DER (Distinguished Encoding Rules)
format with permitted file extensions .key or .KEY.
NOTE: Unencrypted private keys are not accepted.
Private Key
Passphrase
Provide the passphrase to decrypt the encrypted private key. Allows up to 64
characters including whitespace.
User/Public
Certificate
Upload/replace or remove a user/public certificate. The supported file formats
are PEM (Privacy Enhanced Mail) or the DER (Distinguished Encoding Rules)
format with permitted file extensions .pem, .PEM, .der, or .DER.