User Manual

UPS Network Management Card 3 User Guide17
Outlet Groups on Status menu
Path: Status > Outlet Groups
This option is not available for all UPS devices. It displays status details of all outlet groups on your UPS. See
also “Outlet Groups on Control menu” and “Outlet Groups on Configuration menu”.
Battery System on Status menu
Path: Status > Battery System
This option is not available for all UPS devices.
Click on Battery Pack 1,2...to reach the Battery Pack n screen page.
Field Description
Battery System Status
State of Charge
The percentage of the UPS battery capacity that is available to support the
attached equipment.
Runtime Remaining How long the UPS can use battery power to support its present load.
Positive Bus Voltage
The UPS device supports both positive and negative battery voltages.
Negative Bus
Voltage:
Replacement Battery
Cartridge SKU
The part number that you should quote for a replacement battery cartridge.
Battery Pack Status
Battery Pack 1, 2... The battery pack number as derived from the internal numbering method.
Serial Number The serial number of the battery pack.
Health
This includes any pack battery system errors including the individual cartridge
errors. Errors are logged as events.
Status
The status of the battery pack, including the statuses of the individual cartridges.
Other than OK, this value can signal the battery is near end of its life, or the
battery lifetime is exceeded for the pack. Errors are logged as events.
Field Description
Battery Pack 1, 2...
or
Internal Pack
Serial Number
(if present)
The serial number of the battery pack.
Firmware Revision The battery pack revision number.
Temperature Temperature as reported by the sensor in the battery compartment.