User Manual

12UPS Network Management Card 3 User Guide
You can set your UI language as you log on by choosing a language from the Language drop-down box. See
“Changing UI Language”.
When HTTPS is enabled, the NMC generates its own certificate. This certificate negotiates
encryption methods with your browser. Refer to the Security Guide on the APC website for more
details.
URL address formats
Type the DNS name or IP address of the NMC in the Web browser’s URL address field and press ENTER.
When you specify a non-default Web server port in Internet Explorer, you must include http:// or
https:// in the URL.
NOTE: HTTP is disabled by default and HTTPS is enabled by default.
Common browser error messages at log-on.
URL format examples.
See also “TCP/IP settings for IPv6 screen”.
Error Message Browser Cause of the Error
“This page cannot be displayed.” Internet Explorer Web access is disabled,
or the URL was not
correct.
“Unable to connect.” Firefox, Chrome
Example and Access Mode URL Format
DNS name of Web1
HTTP
http://Web1
HTTPS
https://Web1
System IP address of 139.225.6.133 and a default
Web server port (80)
HTTP
http://139.225.6.133
HTTPS
https://139.225.6.133
System IP address of 139.225.6.133 and a non-default
Web server port (5000)
HTTP
http://139.225.6.133:5000
HTTPS
http://139.225.6.133:5000
System IPv6 address of 2001:db8:1::2c0:b7ff:fe00:1100 and
a non-default Web server port (5000)
HTTP
http://
[2001:db8:1::2c0:b7ff:fe00:
1100]:5000