User`s guide

1UPS Network Management Card 2 User’s Guide
Introduction
Product Description
Features
The AP9630 Network Management Card 2:
• Provides UPS control and self-test scheduling features.
• Provides data and event logs.
• Enables you to set up notifications through event logging, e-mail, and SNMP traps.
• Provides support for PowerChute
®
Network Shutdown.
• Supports using a Dynamic Host Configuration Protocol (DHCP) or BOOTstrap Protocol (BOOTP)
server to provide the network (TCP/IP) values of the NMC.
• Supports using the Remote Monitoring Service (RMS).
• Provides the ability to export a user configuration (.ini) file from a configured card to one or more
unconfigured cards without converting the file to a binary file.
• Provides a selection of security protocols for authentication and encryption.
• Communicates with StruxureWare Central or InfraStruxure Manager.
The AP9631 Network Management Card includes all AP9630 Network Management Card features and the
following:
• Provides two USB ports, which support upgrading the firmware.
• Supports two universal input/ output ports, to which you can connect:
– Temperature (AP9335T) or temperature/humidity sensors (AP9335TH)
– Relay input/output connectors that support two input contacts and one output relay (using the
AP9810 Dry Contact I/O Accessory, which is an optional add-on)
The two Schneider Electric UPS Network Management Cards (NMC) mentioned below are
Web-based, IPv6 Ready products. They can manage supported devices using multiple open
standards such as:
Hypertext Transfer Protocol (HTTP) Secure SHell (SSH)
Simple Network Management Protocol
versions 1 and 3 (SNMPv1, SNMPv3)
Hypertext Transfer Protocol over Secure
Sockets Layer (HTTPS)
File Transfer Protocol (FTP) Secure Copy (SCP)
Telnet Syslog
RADIUS