User`s guide

10 UPS Network Management Card 2 User’s Guide
Example: To delete a file:
1. Navigate to the folder that contains the file. For example, to navigate to the
logs folder, type:
cd logs
2. To view the files in the
logs folder, type:
dir
3. Type
delete <file name>.
detstatus
Access: Super User, Administrator, Device User
Description: View the detailed status of the UPS. See also the -st option in “ups” on page 18.
dir
Access: Super User, Administrator, Device User
Description: View the files and folders stored on the NMC.
dns
Access: Super User, Administrator
Description: Configure and display the manual Domain Name System (DNS) settings.
Option Arguments Description
-all Show all applicable status information for this UPS.
-rt
Runtime remaining, in hours and minutes.
-ss
UPS status summary: on line, on battery, etc.
-soc
UPS battery charge, as a percentage of the total capacity.
-om
Output measurements: voltage, frequency, watts percentage, VA
percentage, current.
-im
Input measurements: voltage and frequency.
-bat
Battery voltage
-tmp
Internal temperature of the UPS
-dg
Diagnostic test results: self-test result and date, calibration result and
date.
Parameter Argument Description
-OM enable | disable Override the manual DNS.
-y enable | disable
Synchronizes the system and the hostname.
This is the same as using “system -s”.
-p <primary DNS server> Set the primary DNS server.
-s <secondary DNS server> Set the secondary DNS server.
-d <domain name> Set the domain name.