Installation Manual

1
Installation Manual
Preliminary Information
Features
The AP9630 Network Management Card:
• Provides UPS control and self-test scheduling features.
• Provides data and event logs.
• Enables you to set up notifications through event logging, e-mail, Syslog
and SNMP traps.
• Provides support for PowerChute
®
Network Shutdown.
• Supports using a Dynamic Host Configuration Protocol (DHCP) or
BOOTstrap Protocol (BOOTP) server to provide the network (TCP/IP)
values of the NMC 2.
• Supports using the Schneider Electric Remote Monitoring Service (RMS).
• Provides the ability to export a user configuration (.ini) file from a
configured card to one or more unconfigured cards without converting the
file to a binary file.
• Provides a selection of security protocols for authentication and encryption.
• Communicates with StruxureWare Data Center Expert or StruxureWare
Operatio
ns.
• Supports Modbus TCP/IP.
The Schneider Electric UPS Network Management Cards (AP9630,
AP9631 and AP9635) discussed in this document are Web-based, IPv6
Ready products. Devices with the NMC installed can be managed using
multiple open standards such as:
Hypertext Transfer Protocol
(HTTP)
Secure SHell (SSH)
Simple Network Management
Protocol versions 1, 2c and 3
Hypertext Transfer Protocol over
Secure Sockets Layer (HTTPS)
File Transfer Protocol (FTP) Secure Copy (SCP)
Telnet Syslog
RADIUS Modbus