Specifications

208V High Voltage UPS for today’s
changing data processing and
telecom equipment
A trend in the data processing and telecommunica-
tions hardware is to use “high voltage” 208V power
supplies. The higher voltage actually uses less cur-
rent, requires smaller wiring and circuit protection,
and can deliver much more power through plugs and
receptacles. The Smart-UPS 208 Series is specifical-
ly designed to accommodate the requirements of
this fast growing trend.
High voltage (208V) is available everywhere you have
120V and can easily be tapped into by an electrician.
Computer and telecommunications manufacturers
have always used 208V for their high powered equip-
ment, but now are using the same technology in
their smaller equipment. Many systems have auto
sensing power supplies that can run on either 208V
or 120V. Contact your equipment vendor to convert
your 120V power supply plug into a 208V plug (see
p. 20 for plug types.)
The Smart-UPS 208V Series uses a 208 Volt input to
supply high quality 208 Volt and 120 Volt output. De-
signed to support a large 208 Volt PBX or computer
load, the Smart-UPS 208V Series also provides up to
400VA of 120V output through two additional out-
lets. By supporting 120 peripheral equipment such
as monitors, modems, or internetworking equip-
ment, the innovative design of the Smart-UPS 208V
Series saves administrators the expense of a sepa-
rate, 120V UPS.
Expandable runtime power protection for
telecom and other 208V equipment
When a power problem corrupts data or causes a
computer-based telecom system to freeze or “hard
crash,” the cost of downtime and recovery can start
at several thousand dollars per hour and go upwards
of $120,000 (for a telecom-intensive catalog sales
company). APC’s Smart-UPS 208V Series keeps your
company and its communications moving forward.
The loss of phone systems can mean the loss of cus-
tomers and thousands of dollars in product orders
along with reduced customer satisfaction. The
Smart-UPS 208V Series combines product perfor-
mance, ease-of-use, and reliability to offer the ulti-
mate UPS solution specifically designed for Northern
Telecom Meridian products, PBX equipment, high
voltage servers, and other 208Vac equipment.
The Smart-UPS XLT and RMXLT can help a business
to survive a prolonged power outage. The Smart-
UPS XLT and RMXLT products increase runtime or
maintain existing runtime on a growing system by
simply plugging in up to ten additional battery packs
(5 RMXLBPs on the SU2200RMXLT). The Smart-UPS
XLT and RMXLT also lower operating and mainte-
nance costs by reducing the number of hard failures
and by eliminating a large portion of “No Trouble
Found” service calls.
APC Smart-UPS 208V Series means reliability.
The SmartSlot™ internal accessory slot allows
you to install optional accessory boards to
customize and enhance the performance of
your APC Smart-UPS, while CellGuard extends
battery life and maximizes uptime.
NEW! Smart-UPS 5000 (SU5000T and SU5000RMT) - 5kVA UPS
A typical rack installation or high powered server will require more power than a typical 120V
service can supply (over 900W). A 42U rack can easily require 5 kVA of power for example. A
rack system would then need 2 or more separate 120V circuits which typically must be
brought in from different rooms or locations. The solution is to power the rack with 208V and
just one circuit supported by APC’s new Smart-UPS 5000. With the addition of the Step-down
transformer (AP9621) you get up to 4500 VA of 120 VAC power.
The Smart-UPS 5000 is the first UPS offered with APC’s Web/SNMP management card
(AP9606) pre-installed through April 1, 2000. This product allows you to easily monitor and
control your SU5000 over your intranet or network. In addition, the SU5000RMT5U has the
most compact form factor of any 5kVA rackmount system.
Smart-UPS
®
208V Tower and Rack-mount Series
12
For more information about all APC products, go to www.apcc.com