User Manual

Icon Preview Shows the affect of applied Sizing and

Identifier definition on how icons will appear in

a Map View.

Note: Sensor values are always shown below

the icon, horizontally, and are not shown in the

Icon Preview.

Map Label Settings option

Use this option to define the identifier and sensor value labels to display for all devices and

sensors on a map.

Note: Sensor values can be displayed for the devices managed by a NetBotz Appliance,

but not for the NetBotz Appliance itself.

Element Description

Show Identifier

Check-mark to select the identifier to show for all

devices and sensors on a map.

Show Value

Check-mark to show the value of the selected

sensor for all devices on the map that report that

sensor.

List

Select the sensor for which you want to show the

value.

Note: Only the devices that report the sensor will show the sensor value.

All the sensors for every device in the selected device group's Map View are listed. There

may be more than one sensor of a given type, as different devices report different sensors.

For example, the main input voltage sensor reported by a Smart-UPS is different than the

main input voltage phase 1 sensor reported by a Symmetra PX. Thus, if you select main

input voltage as the sensor, only devices that have that exact sensor will report the value.

Devices that report the selected sensor will update with the sensor value except for the

following:

• Devices that do not report the sensor value.

•

Devices that have a different sensor defined in the Custom Label Settings display.

Note: You can also use the Custom Label Settings display to select a new sensor

value label for one device on a map without affecting the sensor value labels at any

other devices.

"Custom Label Settings" display

Use this display to define a custom identifier to display for the selected device or set of

devices in a map. You must select one device at a time to also define a specific sensor

value to display instead of the sensor value you set in Map Settings.

Note: Sensor values can be displayed for the devices managed by a NetBotz Appliance,

but not for the NetBotz Appliance itself.

StruxureWare Central 6.3.0