User Manual

on the InfraStruxure Manager, NTP and
Time Zone settings on InfraStruxure
Manager are available for migration.
• When NTP is enabled on both the
StruxureWare Central server and
InfraStruxure Manager, only the Time
Zone settings on InfraStruxure Manager
are available for migration.
• When NTP is enabled on the
StruxureWare Central server and disabled
on the InfraStruxure Manager, only the
Time Zone settings on InfraStruxure
Manager are available for migration.
• When NTP is disabled on both the
StruxureWare Central server and
InfraStruxure Manager, Time and Time
Zone settings on InfraStruxure Manager
are available for migration. The time on
the StruxureWare Central is set to match
the time on the InfraStruxure Manager.
Note: When the time on the StruxureWare
Central server and InfraStruxure Manager is less
than one minute apart, time is not available for
migration.
Notification Settings
• Devices on the public or private LAN must
be migrated in order to migrate notification
settings. Otherwise, only recipients are
migrated.
• A StruxureWare Central notification policy
is created for each device group migrated
from InfraStruxure Manager. An alarm
action is then created for each recipient
with its notification settings.
Note: Notification policies are not created
for groups containing no devices.
• Credentials for the APC Remote
Monitoring Service (RMS) are not
migrated. You must manually enter your
RMS credentials in the StruxureWare
Central client.
Export Event Log
The event log feature is not available on the
StruxureWare Central server. You can export the
InfraStruxure Manager event log as a *.CSV or
*.txt file to a location you specify on the local
drive.
Add License Keys
You can add additional license keys, if
necessary, to manage nodes migrated from the
InfraStruxure Manager, or to access the
functionality available in separately-licensed
applications.
Note: Adding license keys for separately-
licensed applications, such as InfraStruxure
Operations, InfraStruxure Change, or
InfraStruxure Capacity, may cause the
StruxureWare Central server to reboot. APC
recommends adding any necessary license keys
before using the InfraStruxure Manager
Migration Utility.
StruxureWare Central 6.3.0
274