User Manual

"Configure Device Settings" display
Use this "APC SNMP Device Configuration" wizard display to select, edit, and apply the
settings for the configuration source selected in the "Select Configuration Source" display,
at the APC SNMP devices selected in the "Select Destination Devices" display.
Typically, this display lists only the configuration source settings that can be used at all the
selected destination devices: the Show Shared Settings Only is selected (check-marked).
If you disable Show Shared Settings Only, all the configuration source settings are listed
and identified as follows:
Note: If no source settings can be used at all of the selected destination devices, Show
Shared Settings Only is disabled, by default.
• Black text identifies a settings category that has only settings that can be shared with
all the destination devices, as well as individual settings that can be shared.
• Brown text identifies a settings category that has at least one setting that cannot be
shared with all the destination devices, as well as individual settings that cannot be
shared.
• Red text identifies a selected settings category that has at least one setting that has
no value defined, as well as individual settings that have no value defined.
Note: If no setting is selected, or a setting that cannot be shared with all the destination
devices, or that currently has no value defined, is selected, you will be unable to initiate
the configuration activity ( Finish will be disabled).
Element Description
List
Use to select the settings that have the
configuration source values you want to
share with the selected devices.
Edit
Click to edit the value for a selected setting.
Note: If you select a setting that has no
value currently defined, you must edit that
setting to define a value before you can
share it with the selected devices.
Back
Click to return to the "Select Destination
Devices" display.
Finish
Click to apply the selected settings at the
destination devices, and exit the "APC
SNMP Device Configuration" wizard.
Note: The status of the configuration
activity will be reported in the
Configuration Status view.
"Save Configuration Template" display
Use this "APC SNMP Device Configuration" wizard display to save edited settings for an
existing ( Edit a Template action) or new template ( Create a Template action).
StruxureWare Central 6.3.0
253