User Manual

The Auto Lock Timeout determines how long the device will wait (10 - 60 seconds) until
it automatically locks the rack door after a card, a key, or a remote command is used to
unlock it. If the door is open or the handle is up after the timeout expires, the device will
issue the lock command until the door is closed and the handle is down.
Additionally, the Auto Lock Timeout limits the time the device will wait for a second
authorizing card swipe after a rack access card that requires authorization is swiped.
Element Description
Card Type
The type of HID proximity card registered to the
NetBotz Appliance selected. You can specify the
card type once only.
Auto Lock Timeout
Specify the time the device will wait until it
automatically locks the rack door after a card, a
key, or a remote command is used to unlock it
(10 - 60 seconds).
"Unregistered Cards" display
Use this display to register one or more rack access cards swiped at a Rack Access Pod
170 device, and not registered to the associated NetBotz Appliance.
Note: You access this display from the "Rack Access Settings" display Show
Unregistered Cards link, available only when a rack access card swiped at device for the
selection has not been registered.
Element Description
List
Card ID#: The identification number
assigned to the card.
Timestamp: The date and time the rack
access card was swiped.
Register
Select to register the selected rack access cards.
Remove
Select to remove the selected unregistered rack
access cards from the list.
Remove All
Select to remove all unregistered rack access
cards from the list.
"Add Rack Access Card" display
Use this display to add a rack access card, and specify its authorization level.
Element Description
Card ID #
Identify the number assigned to the card, in the
format shown.
User Name
Identify the user name assigned to the card
Description
Provide a description for the card, if desired.
StruxureWare Central 6.3.0
241