User Manual

Note: For information about the possible status results, see the "Results" display
description.
"Select NetBotz Appliance" display
Use this display to select the NetBotz Appliance, or appliances, you want to configure for
the selected NetBotz Appliance Configuration option.
Note: The Camera Settings option uses a "Select Camera" display instead of this "Select
NetBotz Appliance" display.
This display lists all NetBotz Appliances the StruxureWare Central server is monitoring.
"Results" display
Use this display to review the result of a configuration activity for the selected NetBotz
Appliance Configuration option.
Four results can be reported for each NetBotz Appliance you configured.
Note: If an invalid password is used during an attempt to restore a NetBotz Appliance that
is in Post-only mode, the status will go to Completed, with no restore or error occurring.
Result Description
In Progress
The configuration is being performed.
Completed
The configuration was successful.
Unknown
Unable to provide a known result.
Recommended Action:
Try configuring the NetBotz Appliance,
again. If the problem persists, log on to the
NetBotz Advanced View at the appliance
to see if the settings were applied
successfully, and to configure the settings,
if needed.
Unauthorized
An incorrect password was provided for the
restore activity.
Note: Unauthorized can be reported only
when attempting to restore the configuration
at an appliance.
Backup/Restore option
Use this option to store a configuration backup file in the StruxureWare Central server
database for a selected NetBotz Appliance or Appliances, or to use those backup files to
restore selected NetBotz Appliance configurations.
The "Backup/Restore" wizard has three displays, two of which are shared with other
NetBotz Appliance Configuration options, and a password pop-up display.
StruxureWare Central 6.3.0
226