User Manual

Use this tab to define settings the StruxureWare Central server will use when discovering
SNMPv1 devices, or devices that use the APC DCal1 protocol, on its private Dynamic Host
Configuration Protocol (DHCP) LAN, Network A.
Note: Changes are applied without a StruxureWare Central server reboot.
Element Description
Private Discovery Settings Enable Private DHCP Discovery: select to
enable the StruxureWare Central server to
automatically discover any SNMPv1 devices, or
devices that use the APC DCal1 protocol, on the
private network. All other private network devices
can be discovered by a device discovery process
that searches the private network's IP addresses.
Read Community Name: define the name
to be used to discover SNMPv1 devices
( public is the default).
Trap Registration On Discovery, Register for Priority Scanning
(SNMP Trap Directed Polling): select to register
the StruxureWare Central server as a trap
receiver at a selected APC SNMPv1 device. This
allows for faster reporting of errors at that device
by the server: as a trap receiver, the server will
poll the device as soon as it receives an SNMPv1
trap from that device; as a non-trap receiver, the
server reports device alarms during normal scan
intervals only.
Note: Only APC SNMPv1 devices discovered
after this option is selected have the
StruxureWare Central server registered as a trap
receiver.
Write Community Name: define the name
that can be used to register the
StruxureWare Central server as a trap
receiver at discovered APC SNMPv1
devices ( private is the default).
Reset APC Devices
Click to reset private LAN APC devices, on
Network A only, to use new IP addresses.
Note: The Write Community Name is used to
reset the APC devices.
Server Access option
Use this option's elements to enable, disable, and configure settings associated with the
four different network-accessible processes that can run on your StruxureWare Central
server: web server, SSH daemon, SNMP daemon, and SOCKS proxy.
Web Server tab
StruxureWare Central 6.3.0
20