User Manual

Inform Port Number
Identify the number of the port that the target
NMS identified in the Primary tab uses to
receive SNMPv3 informs.
Encryption Protocol
Select whether encryption will be used with the
SNMPv3, and if used, which protocol: None,
DES, or AES-128.
Encryption Password
Identify the encryption password to be used to
send SNMPv3 informs.
Verify Password
Type in the password, again.
"Send Short Message E-mail" display:
Use this display to define the settings for a Send Short Message E-mail alert action on a
NetBotz Appliance.
A name field, severity selections, and the "Alert Action Scheduling" display that all alert
action types share, are also available.
Note: Make sure the SMTP settings for the monitored NetBotz Appliances are defined
properly.
E-mail tab:
Element Description
Add
Click to add an e-mail address to the address list.
Remove
Click to remove a selected e-mail address from
the address list.
Include Threshold-specific Addresses
Select to send e-mails to e-mail addresses
defined for NetBotz Appliance alert thresholds.
Subject
Enter a subject for the message; macros can be
used.
Message
Enter a message; macros can be used.
Threshold-specific addresses example:
• A “generic_send_SMS_email” alert action is created with no e-mail addresses
included.
•
Include Threshold-specific Addresses is selected for this
"generic_send_SMS_email" action.
• The “generic_send_SMS_email” alert action is added to an alert profile called
“alert_profile1.”
• The “alert_profile1” profile is specified for two thresholds, “temp_too_high” and
“humidity_too_high.”
•
The “temp_too_high” threshold has Threshold-Specific Addresses for User1 and
User2, and the “humidity_too_high” threshold has Threshold-Specific Addresses
for User3 and User4.
• When “temp_too_high” triggers, only User1 and User2 will receive short-
message e-mails.
• When “humidity_too_high” triggers, only User3 and User4 will receive short-
message e-mails.
StruxureWare Central 6.3.0
179