User Manual

option in the Device menu. Once the supplemental OIDs are defined, you can create
thresholds on the sensors.
Numeric alarm thresholds
Numeric alarm thresholds are thresholds defined for sensors that report numeric values.
There are nine specific types of numeric thresholds that can be set on numeric sensors.
Numerical threshold options:
•
The Other Numerical Sensors and Other State Settings options, and for some
third-party devices, Voltage, can be used to set threshold settings at a NetBotz device
for the full SNMP support devices it monitors.
•
All threshold options except Dew Point can be used to define threshold settings
the StruxureWare Central server will use to monitor its full SNMP support devices.
Threshold Value Description
Air Flow <n> ft/min
Settings for sensors that
measure air movement as feet
per minute.
Note: Sensors that use a
different measurement, such as
cubic feet per minute (CFM) will
be displayed under the Other
Numeric Sensors option.
Audio Relative number (0 - 100)
Settings for sensors that
measure the volume of sound.
Current (Amps) Amps (0.0 - 100.0)
Settings for sensors that
measure current as total
amperage (amps).
Dew Point °F (-40.0 - 122.0)/ °C (-40.0 -
50.0)
Settings for sensors that
measure dew point as degrees
Fahrenheit (°F) or Celsius (°C).
Energy (kWh) kWh
Settings for sensors that
measure energy consumption
as kilowatt hours (kWh).
Humidity % (0 - 95)
Settings for sensors that
measure relative humidity as a
percentage (%).
Other Numeric Settings Varied
Settings for sensors that
measure numeric settings not
reported for other Thresholds
options.
Power (VA) VA and kVA
Settings for sensors that
measure power as total Volt-
amperes (VA) or kiloVolt-
amperes (kVA).
Note: Sensors that measure
power as a percentage of VA
will be displayed under the
Other Numeric Sensors
option.
StruxureWare Central 6.3.0
137