User Manual

•
Current (Amps)
•
Dew Point
•
Energy (kWh)
•
Humidity
•
Other Numeric Sensors
•
Power (VA)
•
Power (kVA)
•
Power (Watts)
•
Power (Kilowatts)
•
Temperature
•
Voltage
• State thresholds:
•
Door
•
Dry Contact
•
Motion Sensor
•
Other State Sensors
Both types of thresholds allow you to do the following:
• Create thresholds at one time for multiple sensors of the same type (for example, all
are Humidity sensors, or all are Door sensors).
• Specify the severity and return-to-normal parameters for any defined threshold.
• Provide a custom URL and custom description for any defined threshold.
• Configure Threshold Scheduling to specify when any defined threshold is active.
• Add any defined threshold to one or more StruxureWare Central notification policies.
Five menus provide access to create alarm thresholds:
•
Create Thresholds , an option in the Alarm Configuration menu.
•
Right-click menu Create Thresholds in the navigation tree in the Navigation view.
•
Right-click menu Create Thresholds in the Device Groups view in the
Monitoring perspective.
•
Right-click menu Create Thresholds in the Device View in the Monitoring
perspective.
•
Right-click menu Create Thresholds in the Map View in the Monitoring
perspective.
Each threshold option allows you to search the sensors monitored by the StruxureWare
Central server that match the selection. You can add a threshold to one of those sensors,
or add thresholds with the same settings to any number of those sensors simultaneously.
Using the right-click menus to add thresholds to one or more sensors allows you to focus
threshold management to the sensors at a single device, or at a set of devices.
Creating numeric and state thresholds
All numeric and state thresholds use the same basic procedure and displays to create
threshold settings.
Note: The same displays are used to create thresholds when you select the Create
Thresholds option in any of the following:
•
The Alarm Configuration menu.
•
The right-click menu in the navigation tree in the Navigation view of the Alarm
Configuration perspective.
•
The right-click menu in the Device Groups, Device View, or Map View of the
Monitoring perspective.
Threshold settings for all monitored devices are available when you use the Alarm
Configuration menu options. Threshold settings for only the device group or device
StruxureWare Central 6.3.0
135