Datasheet

InfraStruXure Manager 3
Safety
Rack-mounting safety
The APC InfraStruXure Manager is shipped with rack-mounting brackets. Install the brackets in the
appropriate position for your rack, and mount the unit. The unit is 1U high. If the unit is mounted in
an enclosure instead of an open rack, the maximum ambient temperature in the enclosure should be
no greater than 95° F (35° C).
• When you install equipment in the rack, make sure it does not interfere with the air flow
required for safe operation for the equipment.
• When you mount equipment in the rack, make sure you do not cause a hazardous condition
because of an uneven mechanical load.
• When you connect equipment to the supply circuit, avoid overloading the circuits, which could
jeopardize over-current protection and damage the supply wiring. See ratings on the equipment
nameplates for guidance.
• Maintain reliable earth grounding of the unit, particularly for supply connections (e.g., when
PDUs that are not directly connected to the branch circuit are used).
Equipment containing a battery
This equipment contains a non-replaceable lithium coin cell battery.
Warning
Danger of explosion if the battery is incorrectly replaced. Call APC service for
battery replacement. This battery must be replaced only with the same or
equivalent type. The battery should be returned to APC for disposal.
Warning
The InfraStruXure Manager contains no user-serviceable parts.