Datasheet

Initial Configuration: Configure the InfraStruXure Manager
12 InfraStruXure Manager
W
7. On the License Key page of the wizard, enter the license key to enable the InfraStruXure
Manager to manage APC devices on the private network (APC LAN) or discover and manage
APC devices on the public network (User LAN).
8. When you are done configuring your InfraStruXure Manager, click Finish to close the Wizard.
Configure the InfraStruXure Manager from the Public Network (User LAN)
1. Connect a computer to the public network (User LAN).
2. Open Microsoft Internet Explorer browser, version 5.5 or higher, and enter the IP address
assigned to the APC InfraStruXure Manager. Ask your network administrator or check the
DHCP server for this IP address.
3. If the Security Warning appears, click Yes to download the APC InfraStruXure Manager
Client.
4. When the Server Log On display appears, use apc (lowercase) for both the username and
password, and click Connect.
5. In the Confirm display, click Yes to run the APC InfraStruXure Manager Setup Wizard.
W
6. On the License Key page of the wizard, enter the license key to enable the InfraStruXure
Manager to manage APC devices on the private network (APC LAN) or discover and manage
APC devices on the public network (User LAN).
7. When you are done configuring your InfraStruXure Manager, click Finish to close the Wizard.
Note
If you click No, you can run the wizard at any time. From the System Management
menu, select the Server option and then select Setup Wizard.
Note
If you click No, you can run the wizard at any time. From the System Management
menu, select the Server option and then select Setup Wizard.