Datasheet

®
USER’S GUIDE Vertical Console Port Server
33
VCPS CLI Commands
Click on a command to view usage details.
Command Use This Command To
cfg Save or load the VCPS system configuration to a non-volatile database.
clear Clear the event or console logs.
cps Configure and administer console port service.
date Set the system date, time, and time zone; show the current system date,
time and time zone.
dhcp Set or display the DHCP configuration, or restart the DHCP interface.
exit End a session and log out.
ftpd Configure or display the FTP configuration.
help Display a list of commands or, using help <com mand>, display
command-specific help.
? Display context-sensitive help.
loadfw Load firmware to the VCPS.
ls List files in the current working directory.
network Set or display the network configuration, show the network status, or
restart the network interface.
ntp Set or display the NTP configuration, or restart the NTP interface.
ping Verify that the device at an IP address that you enter exists and can
accept requests.
port Set or display a port’s configuration, or restart a port server.
prompt Set the command prompt form.
radius Set or display a RADIUS server configuration, or restart a RADIUS client.
reboot Reboot the system.