manual

• Individual outlet level power metering and user resettable energy (kWh) logs
• Individual outlet level control for power cycling remotely located equipment,
controlling outlet access (i.e. turn off unused outlets), and user-defined
equipment power-up sequencing
• Active power metering and remote alarming including volts, amps, real power
(kW), and energy (kWh) measurements
• Comprehensive device, phase, and breaker bank level metering for overload
protection, capacity planning purposes, and energy efficiency initiatives
• Environmental temperature and humidity sensor input for active monitoring and
alarming via the Rack PDU network device
• Fully featured network management connectivity capability via web, SNMP,
telnet
• Field replaceable display and network management module for field service and
future upgrade capability
• Lowest profile design helps avoid space interference with IT equipment and
improve airflow efficiency
• Redundant internal power supplies provide maximum product reliability
• Network Port Sharing (Up to 4 rack PDUs share one IP address in one
enclosure)
• Network flash upgradeable and local USB port for easy firmware updates
Metered-by-Outlet with Switching
Rack PDU - AP8600 Series
Easy to install and space saving
solution to secure critical power cords
APC Exclusive
Locking IEC Connectors
Power Metering by
Individual Outlet
Monitor power (W) and energy use (kWh) at
each individual outlet enables energy capacity
planning and energy use optimization