User`s guide

Switched Rack Power Distribution Unit 6
Bracket mounting (horizontal)
You can order a rack-mount bracket kit
(AR8116BLK) from APC. The brackets attach to
the Switched Rack PDU in either of two directions,
shown in the figures in step 1. Consider the
orientation of the Switched Rack PDU in the
enclosure before attaching the brackets. A recessed
orientation allows the Switched Rack PDU to be
mounted even with the enclosure; a raised
orientation allows you to route cables through the
channel.
Caution. Use only the supplied
screws.
1. Attach two brackets to the rear of the
Switched Rack PDU, using two pan-head
screws (provided in the bracket kit) for
each bracket.
– Recessed orientation
– Raised orientation
Note. You can mount two PDUs on
one side of the enclosure by using the
raised orientation.