User`s guide

Switched Rack Power Distribution Unit 4
Horizontal Mounting.
To install the PDU using the horizontal mounting
brackets, install the brackets on the PDU and then
attach the PDU to the rack using cage nuts
(provided with your enclosure).
Toolless mounting
Note. This option may not be available
with all enclosures.
1. Slide both mounting pegs into the holes
located in the channel in the rear panel of
the enclosure.
2. Snap the Rack PDU into place by pushing
it downward until it locks into position.
Note. You can mount two PDUs on
one or both sides of the enclosure by
using the toolless mounting method.