User`s guide

Switched Rack Power Distribution Unit
3
Install the Rack PDU
Attach the cord retention trays
Attach the cord retention trays to the Switched
Rack PDU, using four flat-head screws (provided)
per tray.
Caution. Use only the supplied
screws.
Attach cords to the tray
Attach each cord to the tray by looping the cord
and securing it to the tray using a wire tie
(provided).
Note. Each cord must be secured to the
tray so that you can unplug it from the
PDU without removing the wire tie.
Note. When installing the PDU,
ensure that the power cord plug is
accessible and that the PDU is
connected to a grounded outlet.
Mounting options
You can install the PDU in one of two ways: using
toolless mounting pegs (provided) or mounting
brackets (provided). The 1-U and 2-U horizontal
PDUs must be mounted using the horizontal
mounting brackets.
Vertical Mounting.
• To install the Switched Rack PDU using the
toolless mounting method, install it in the
rear of a NetShelter
®
VX or SX enclosure,
in the cable channel directly behind the rear
vertical mounting rails.
• To install the Switched Rack PDU using the
mounting brackets, install it on a vertical
mounting rail of your rack or enclosure.