User`s guide

®
®®
®
USER’S GUIDE kvm switch
20
Powering off and restarting
After turning off the KVM Switch for any reason, perform these steps.
Before applying power to the KVM Switch:
1. Remove power from all connected computers.
2. Wait 10 seconds, and then plug in the KVM Switch.
3. Apply power to the computers only after the KVM Switch is running.
If there is no response to keyboard or mouse input, press the
Reset switch on the front panel.
Unplug the power cord of any computer with the Keyboard
Power On function enabled; otherwise, the station continues
to receive power from the computers.
If you shut down more then one station, apply power to the
highest-numbered station first, continuing down to the lowest-
numbered station.