User`s guide

®®

USER’S GUIDE

kvm switch

Operation

Switching station positions

Switch KVM station positions by unplugging a KVM station from one port

and plugging it into a different one. Then, reset the OSD to correspond the

change for the OSD menus.

Hot-Plugging computer ports

Manually reconfigure the OSD information for the new port information so

that the OSD menus correspond to the change. See SET (F3) and ADM

(F4) for details.

Hot-Plugging console ports

You can hot-plug the keyboard, the monitor, and the mouse. When hot-

plugging the mouse:

• If you use the same mouse, unplug it and plug it back into the KVM

Switch.

• If you use a different mouse, all KVM stations and computers on the

installation must be shut down for ten seconds and then restarted after

you plug in the mouse.

See RESET STATION IDS for details.

ee a

See the Installation and Quick-Start Manual included with the

KVM Switch for instructions on restarting the switch.