User`s guide

®
®®
®
USER’S GUIDE kvm switch
8
LIST (F2). To activate the LIST function, press F2 or click the F2 menu
option located at the top of the main menu screen.
LIST allows you to broaden or narrow the scope of ports listed on the OSD.
To activate a submenu option, move the highlight bar to the desired option,
and press
ENTER. An icon to the left of the menu option indicates your
selection.
The following table provides a description of each F2 LIST submenu option:
SET (F3). To activate the SET function, press F3 or click the F3 menu
option at the top of the main menu screen.
SET allows an Administrator or User to set up a unique working
environment profile. The stored profile activates each time a corresponding
user logs into the system.
To activate a submenu option, move the highlight bar to the desired option,
and then press
ENTER. An icon to the left of the menu option indicates your
selection.
Main Option Description
ALL Lists all the ports on the installation.
POWERED ON Lists only those ports with attached computers that are
turned on.
QVIEW Lists only the ports selected as Quick View Ports (see SET
QUICK VIEW PORTS).
QVIEW + POWERED ON Lists only those ports selected as Quick View Ports with
their attached computers turned on.