Specifications

Coaxial Analog KVM Switch/Coaxial Analog KVM Console Extender
5
 Power LED Indicates that the Coaxial Analog KVM Switch is receiving
power.
 Station ID LED Displays the two-digit station number of the Coaxial Analog
KVM Switch. The station number indicates the Analog
KVM Switch's position in the daisy-chain sequence.
 Firmware upgrade reset
switch
The Reset switch is in the NORMAL position during normal
operation or while performing a firmware upgrade. If the
firmware upgrade does not succeed:
Slide the Reset switch to the RECOVER position.
Remove and then restore power to the Coaxial Analog KVM
Switch.
Slide the Reset switch back to the NORMAL position.
Turn the Coaxial Analog KVM Switch off and then on.
Item Description