Specifications

4 Coaxial Analog KVM Switch/Coaxial Analog KVM Console Extender
Front panel of Coaxial Analog KVM Switch (AP5202 shown)
Item Description
 Port LEDs Each port has a left (Online) and right (Selected) LED pair
that provides status information about a corresponding server
port.
A GREEN Online LED indicates the corresponding attached
server port is operating correctly.
An ORANGE Selected LED indicates the corresponding
attached server has the KVM focus. Under normal
conditions, the LED is steady. When accessing its port under
Auto Scan Mode, the LED flashes.
Each time the Coaxial Analog KVM Switch begins to
provide power, it performs a self-test. The Online LED and
then the Selected LED blink once during the self-test.
 Reset switch Allows you to perform a system reset by pressing the
recessed Reset switch with a thin object (such as the end of a
paper clip or ballpoint pen).
 Disable Remote button Enables or disables remote access to the console.
 Remote console To use a remote console, plug a CAT-5 cable (not included)
into the RJ-45 connector. When both a local and remote
console are present, both can access the Analog KVM Switch
(but not simultaneously).
Push the Disable Remote button to toggle between “Remote
access allowed” and “Remote access disabled.”
When the remote console is accessing the switch, you can
view input data through the local console, but can only make
changes through the remote console. When the local console
is accessing the switch, you can view input data through the
remote console, but can only make changes through the local
console.
The Local and Remote LEDs indicate which console is
currently in use. When a remote extension unit is attached
and is receiving power, the two LEDs alternately light when
no one is accessing either console.
 Upgrade port The firmware upgrade cable plugs into the RJ-11 connector
and transfers firmware upgrade data from the administrator's
server to the Coaxial Analog KVM Switch.
1
9
ON LINE SELECTED
2
10
3
11
4
12
5
13
6
14
7
15
8
16
RESET
DISABLE
REMO TE
REMO TE
UPGRADE
NORMAL RECOVE R
F/W UPGRADE
POWER ST ATION ID
KVM Switch
LOCAL
aem0041a
REMOTE CONSOLE