Specifications

Coaxial Analog KVM Switch/Coaxial Analog KVM Console Extender
19
How to Install the Coaxial Analog KVM Console
Extender
Pre-installation
Turn off power to all devices that you plan to connect. To prevent damage to
your equipment because of static-electric discharge, ground all devices
involved in the installation.
Warning: For safety and grounding instructions, consult your
device manuals or contact the customer support department of
the device manufacturer.
Installation
To install the Coaxial Analog KVM Console Extender:
1. Place the Coaxial Analog KVM Console Extender on a desk or flat surface
within convenient reach of the keyboard, mouse, and monitor cables.
2. Plug the keyboard, monitor, and mouse cables for the remote console devices
into the appropriate ports of the Coaxial Analog KVM Console Extender
(

).
3. Plug either end of the CAT-5e or CAT-6 cable into the I/O port. Plug the other
end into the Remote Console port of the Coaxial Analog KVM Switch (

).
4. Plug the power adapter (included) into an AC power source, then plug the
power cable of the adapter into the Power Inlet of the Coaxial Analog KVM
Console Extender (

).
5. Apply power to the Coaxial Analog KVM Switch by plugging the power
cable into the port marked Power on the rear of the Coaxial Analog KVM
Switch.
6. Apply power to the servers.
REM OTE
UPGRADE
NORMAL RECOVER
F/W UPGRADE
POWE R
STATION ID
LOCAL
REMOTE CONSOLE
aem0047a