Specifications

Coaxial Analog KVM Switch/Coaxial Analog KVM Console Extender

Coaxial Analog KVM Console Extender

Product Description and Inventory

Overview

Use the Coaxial Analog KVM Console Extender to operate the Coaxial Analog

KVM Switch from a remote console that is up to 500 ft (150 m) from the

Switch.

Inventory

Hardware requirements

Remote Console. To use the Coaxial Analog KVM Console Extender, you

need the following equipment:

• VGA, SVGA, or Multisync monitor capable of the highest resolution that

you plan to use on any server in the installation

• PS/2-style mouse

• PS/2-style keyboard

Note: If you plan to connect a DDC monitor to the local unit,

the monitor that connects to the remote unit must be able to

support the highest video resolution the DDC monitor can

provide.

Cables. Use CAT-5e or CAT-6 UTP (Unshielded Twisted Pairs) cable (not

included) to connect the Coaxial Analog KVM Console Extender to the Coaxial

Analog KVM Switch. Cable of a lesser standard will cause the video signal to

degrade. The CAT-5e or CAT-6 cable should be no longer than 500 ft (150 m).

Quantity Item

1 Coaxial Analog KVM Console Extender

(AP5203)

1 Power adapter

1 Warranty card