Specifications

12 Coaxial Analog KVM Switch/Coaxial Analog KVM Console Extender
Operation—Coaxial Analog KVM Switch
Select ports using one of the following two methods: entering Hot Key
combinations from the keyboard or using the On-Screen Display (OSD).
Hot Key mode
To activate or deactivate Hot Key mode, press
NUM LOCK and the hyphen (-)
key at the same time.
Note: Release the hyphen (-) key within 1/2 second. Otherwise Hot
Key activation stops and has no effect.
When Hot Key mode is active, the following changes occur:
• Caps Lock and Scroll Lock LEDs on the keyboard flash in succession.
These stop flashing and revert to normal status after you exit Hot Key
mode.
• The screen displays HotKey: and all subsequent keyed-in Hot Key
information.
• Ordinary keyboard and mouse functions have no effect. You can input
only Hot Key-compliant keystrokes and mouse clicks.
Press
ESC to exit Hot Key mode.
See the User’s Guide on the provided Coaxial Analog KVM Switch
Utility CD for additional information about Hot Key functions.
Selecting the active port
Each server port is assigned a Port ID. Directly access any server connected to
your Coaxial Analog KVM Switch System with a Hot Key combination that
specifies the Station ID and the Port ID of the connected server’s port.
To select the active port:
1. Activate Hot Key mode by pressing
NUM LOCK and the hyphen (-) key
simultaneously.
2. Enter the 2-digit station ID and 2-digit Port ID; do not separate these
numbers with a space character.
Note: The Station ID and Port ID are displayed on the command
line as you type each number. For example, enter 0305 to switch
to Port 5 of the third Coaxial Analog KVM Switch in a
multi-station chain. Use
BACKSPACE to erase an incorrectly typed
number.
3. Press
ENTER. The Coaxial Analog KVM Switch will focus on the designated
server and exit Hot Key mode.