Specifications

10 Coaxial Analog KVM Switch/Coaxial Analog KVM Console Extender
2. Use a custom cable set (see “Cable” on page 2) to connect the Coaxial
Analog KVM Switches. Connect the Chain Out port of the first Coaxial
Analog KVM Switch to the Chain In port of the second Coaxial Analog
KVM Switch, connect the Chain Out port of the second Coaxial Analog
KVM Switch to the Chain In port of the third Coaxial Analog KVM Switch,
etc.
Note: Do not use the Chain In port of the first Coaxial
Analog KVM Switch. Chain In ports are only used on
Coaxial Analog KVM Switches that have a station number of
2 or higher.
Chain In ports are used to connect to the parent Coaxial
Analog KVM Switch, which has a lower station ID number.
Do not use the Chain Out port of the last Coaxial Analog
KVM Switch.
The following figure shows four Coaxial Analog KVM Switches in a
daisy-chain configuration.
aem0044a
100-240V--1A, 50/60Hz
CHAIN IN N/A FOR ST No. 1
CONSOLE
POWER
100-240V--1A, 50/60Hz
CHAIN OUT
CHAIN IN N/A FOR ST No. 1
CONSOLE
POWER
100-240V--1A, 50/60Hz
CHAIN IN N/A FOR ST No. 1
CONSOLE
POWER
CHAIN OUT
CHAIN OUT
100-240V--1A, 50/60Hz
CHAIN IN N/A FOR ST No. 1
CONSOLE
POWER
CHAIN OUT
First Coaxial
Analog KVM Switch
Analog KVM Switch
Last Coaxial