Specifications

8 Coaxial Analog KVM Switch/Coaxial Analog KVM Console Extender
How to Install a Single Coaxial Analog KVM Switch
Pre-installation
Turn off power to all devices that you plan to connect. To prevent damage to
your equipment because of static-electric discharge, ground all devices
involved in the installation.
Warning: For safety and grounding instructions, consult your
device manuals or contact the customer support department of
the device manufacturer.
Single-station installation
To install a single-station system, in which no additional Coaxial Analog KVM
Switches are serially connected to the first Switch:
1. Plug your keyboard, mouse, and monitor into the correct ports on the rear of
the Coaxial Analog KVM Switch.
aem0043a
100- 240V--1A, 50/6 0Hz
CONSOLE
PO WER