Specifications

Coaxial Analog KVM Switch/Coaxial Analog KVM Console Extender
7
How to Mount the Coaxial Analog KVM Switch
Mounting options
You can install the Coaxial Analog KVM Switch in the front or the rear of the
rack or enclosure. To mount the Coaxial Analog KVM Switch horizontally in a
NetShelter
®
or any other standard EIA-310 rack or enclosure:
1. Attach the mounting brackets to the front or rear of the Coaxial Analog KVM
Switch, using flat-head screws (provided).
2. Insert cage nuts (provided with the NetShelter enclosure) on the vertical
mounting rails above a number at the top of a U-space in your enclosure and
below the same number at the bottom of the U-space.
3. Align the mounting holes on the brackets with the cage nuts you installed in
step 2, and insert four mounting screws (provided with the rack) to secure the
brackets to the enclosure.
1 U
ns0750a
mph0290a